Usage
Local Control via Touchscreen
From the touchscreen, the user can:
- Turn the thermostat ON / OFF
- Adjust the temperature setpoint
- Select the operating mode
- Select the fan speed
Operating Modes
| Mode | Description |
|---|---|
| Heat | Heating only — the thermostat controls heating outputs to reach the setpoint |
| Cool | Cooling only — the thermostat controls cooling outputs to reach the setpoint |
| Fan | Fan only — no heating or cooling, fan runs at the selected speed |
| Auto | Automatic switching between Heat and Cool depending on the room temperature and setpoint |
Fan Speed
| Speed | Description |
|---|---|
| Low | Fan runs at low speed |
| Medium | Fan runs at medium speed |
| High | Fan runs at high speed |
| Auto | Fan speed is automatically adjusted by the thermostat based on the difference between the room temperature and the setpoint |
Remote Control via WiFi
The thermostat can also be controlled remotely via WiFi 2.4 GHz and the AGRID application.
Autonomous Operation
In case of WiFi loss, the thermostat continues in local standalone mode.
Security and Data
WiFi Configuration
WiFi credentials are configured during commissioning directly from the thermostat settings screen or via the AGRID Installer application.
Firmware Updates
Software updates are performed remotely (OTA) via the AGRID server in a secure manner.
Factory Reset
A complete reset of the thermostat is possible from the settings screen or via the AGRID application. This operation erases all personal data (WiFi credentials, configuration) and restores factory settings.